Correction of nostril contour with a recoil graft inserted through a lateral approach

Article information

Arch Craniofac Surg. 2026;27(4):210-212
Publication date (electronic) : 2026 August 20
doi : https://doi.org/10.7181/acfs.2026.0014
1Department of Otorhinolaryngology-Head and Neck Surgery, Arak University of Medical Sciences, Arak, Iran
2Otorhinolaryngology Research Center, Amir Alam Hospital, Tehran University of Medical Sciences, Tehran, Iran
3Department of Physics, Faculty of Sciences, Arak University, Arak, Iran
Correspondence: Benyamin Rahmaty Department of Otorhinolaryngology-Head and Neck Surgery, Arak University of Medical Sciences, A’lam-Al-Hoda Street, Shahid Shiroodi Street, Arak 3819693345, Iran E-mail: Benyamin.Rahmaty@gmail.com
Received 2026 January 6; Revised 2026 January 6; Accepted 2026 August 20.

Abstract

An essential step in rhinoplasty is correcting the shape of the nostrils by addressing both function and appearance. Traditional methods like alar base reduction, alar rim grafts, nostril sill augmentation, and composite grafts have specific indications and benefits. We introduce a new approach with several potential advantages. It employs a lateral rim graft inserted through a lateral incision for precise placement close to the skin. This technique enhances the nostril’s contour without creating an unnatural or bulky appearance by considering the effects of two vectors. The method supplies structural support to the nostril rim while maintaining its natural curve, preventing collapse, and preserving both aesthetic and functional integrity. The recoil rim graft not only improves the nostril contour but also offers biomechanical and functional advantages by retracting the alae of the nose superior-laterally.

INTRODUCTION

Nostril shape refinement is crucial in successful rhinoplasty, addressing both functional and aesthetic goals. Recently, many patients have been seeking symmetrical nostrils, although this desire may not always be possible because of asymmetrical growth of the face. Techniques such as alar base reduction, alar rim grafts, nostril sill augmentation, and composite grafts are used with specific indications and advantages [1-3]. However, the approach illustrated here seeks to address some limitations of existing methods, particularly in achieving subtle, precise contouring.

In Iranian culture, a preference for more rounded nostrils is well-established. Our method not only respects this aesthetic preference but also produces a natural, physiological, rounded look consistent with these standards. This cultural consideration adds a unique dimension to our work, fostering a better understanding of diverse aesthetic ideals [4].

IDEA

This technique emphasizes that the lateral rim graft employed predominantly consists of septal cartilage. This material provides an optimal balance between rigidity and flexibility, thereby facilitating the achievement of the desired recoiling force. The choice of the donor site, particularly septal cartilage, ensures both natural curvature and structural integrity. In some revision or primary cases, rib cartilage may also be used. Nevertheless, the effectiveness of this technique depends heavily on creating a snug-fitting pocket, which stabilizes the graft and enhances the recoiling effect.

The septal cartilage graft, which is usually harvested from the patient’s septum by maintaining an L-strut, is conceptualized as an elastic strip in the surgical context. This graft maintains an intrinsic elasticity defined by its natural shape, whereas the surgically created lateral pocket shows a different, set geometry and stiffness. When the graft is inserted and constrained within the pocket, a geometric incompatibility arises. To conform to the shape of the pocket, the graft must be deformed from its intrinsic curvature to match the geometry of the skin envelope, while retaining its tendency to return to its original shape.

According to classical Euler–Bernoulli beam theory, the bending of an elastic strip produces a restoring moment proportional to curvature (M=EIκ) [5]. When septal cartilage is inserted within a tightly fitting lateral pocket close to the skin, a curvature mismatch between its intrinsic shape and the imposed pocket geometry generates elastic recoil forces. This simplified biomechanical model, previously applied to biological tissues, offers a mechanistic explanation for the observed superolateral nostril support (Figs. 1, 2) [5,6].

Fig. 1.

Biomechanical model of a cartilage graft in a constrained lateral pocket. Conceptual biomechanical model illustrating a septal cartilage graft behaving as an elastic strip within a surgically created lateral nasal pocket. Curvature mismatch between the intrinsic graft curvature (κ₀) and the imposed pocket curvature (κp) generates an internal bending moment (M), which serves as the source of elastic recoil.

Fig. 2.

Elastic recoil force generation by curvature mismatch. Schematic representation of the elastic strip model. (A) Intrinsic curvature of the septal cartilage graft (κ₀). (B) Imposed curvature of the lateral nasal pocket (κp). (C) Constraint of the graft within the pocket produces a restoring moment (M), resulting in medial (F_M) and lateral (F_L) recoil forces that provide superolateral nostril support. EI, flexural rigidity.

During the procedure, a constricted pocket is fashioned on the lateral side, adjacent to the skin, in the superior and inferior parts of the ala. This constricted pocket induces a rim-graft recoil mechanism. As a result, after insertion, the graft tends to return toward its original shape, creating an elastic recoil force that supports the nostril rim in an outward and upward direction. A lateral rim graft, measuring 1.5 to 3 cm in length and 1 mm in width, is subsequently prepared and inserted into the pocket. The surgical technique is demonstrated in Supplementary Video 1.

The graft, now under elastic stress, exerts a distributed force along the walls of the tissue pocket. The net effect is an outward, supportive force on the superolateral nasal wall. The rim graft functions like a coil and also provides lateral and superior forces to the nostril. Consequently, it helps open the external valve and create a rounded nostril.

DISCUSSION

This technique provides structural support to the nostril rim while maintaining its natural curvature. It is particularly effec-tive for subtle refinements of the nostril shape and is designed to prevent nostril collapse by ensuring both aesthetic and functional outcomes [6,7]. This technique may be performed following alar base resection or independently of alar base manipulation, using either an open or closed rhinoplasty approach (Fig. 3).

Fig. 3.

Surgical illustration demonstrating the lateral incision, pocket creation, graft placement, and improvement in nostril contour.

This simplified biomechanical model provides a clear mechanistic explanation for the clinical outcome. The support is not temporary but is sustained by the passive elastic properties of the cartilage. Unlike a static spacer, the graft actively exerts outward pressure due to its locked-in elastic strain. External forces attempting to collapse the nostril must surpass this pre-existing elastic recoil. The graft functions as a resilient spring.

The tightly fitting pocket is essential because it provides the necessary constraint to prevent the graft from merely reverting to its intrinsic shape, thus preserving the curvature mismatch and the associated restoring forces. The elastic recoil of the constrained cartilage graft may therefore help maintain the shape and support of the nostril rim.

Notes

Conflict of interest

No potential conflict of interest relevant to this article was reported.

Funding

None.

Ethical approval

This study received approval from the Research Ethics Committee of Arak University of Medical Sciences (Approval ID: IR. ARAKMU.REC.1404.395).

Author contributions

Conceptualization: Benyamin Rahmaty. Formal analysis: Hossein Sadeghi. Methodology: Benyamin Rahmaty, Hossein Sadeghi. Visualization: Benyamin Rahmaty, Hossein Sadeghi. Investigation: Benyamin Rahmaty. Validation: Hossein Sadeghi. Writing–original draft: Benyamin Rahmaty. Writing–review & editing: Benyamin Rahmaty, Hossein Sadeghi. All authors read and approved the final manuscript.

Supplementary materials

Supplemental data can be found at: https://doi.org/10.7181/acfs.2026.0014.

Supplementary Video 1.

Surgical demonstration of the recoil rim graft technique, including lateral pocket creation and graft insertion.

acfs-2026-0014-Supplementary-Video-1.mp4

References

1. Cerkes N. Alar base reduction: nuances and techniques. Clin Plast Surg 2022;49:161–78.
2. Adham G, Keyhan SO, Fallahi HR, Ziaei H, Thomas M. Nasal sill augmentation: an overlooked concept in rhinoplasty-a technical note and review of the literatures. Maxillofac Plast Reconstr Surg 2021;43:14.
3. Uhm KI, Shin KS, Lee YH, Lew JD. Nostril sill augmentation in secondary cleft lip. Ann Plast Surg 1987;19:391–9.
4. Hall DB, McColl LF, Katta J, Bonanno J, Kim LR, Nesemeier BR. Bringing inclusivity to “Ethnic” rhinoplasty: a novel anatomical classification system. Facial Plast Surg Aesthet Med 2025;27:61–5.
5. Timoshenko SP, Gere JM. Mechanics of materials 3rd edth ed. Chapman & Hall; 1991.
6. Fung YC. Biomechanics: mechanical properties of living tissues 2nd edth ed. Springer; 1993.
7. Mow VC, Ratcliffe A, Poole AR. Cartilage and diarthrodial joints as paradigms for hierarchical materials and structures. Biomaterials 1992;13:67–97.

Article information Continued

Fig. 1.

Biomechanical model of a cartilage graft in a constrained lateral pocket. Conceptual biomechanical model illustrating a septal cartilage graft behaving as an elastic strip within a surgically created lateral nasal pocket. Curvature mismatch between the intrinsic graft curvature (κ₀) and the imposed pocket curvature (κp) generates an internal bending moment (M), which serves as the source of elastic recoil.

Fig. 2.

Elastic recoil force generation by curvature mismatch. Schematic representation of the elastic strip model. (A) Intrinsic curvature of the septal cartilage graft (κ₀). (B) Imposed curvature of the lateral nasal pocket (κp). (C) Constraint of the graft within the pocket produces a restoring moment (M), resulting in medial (F_M) and lateral (F_L) recoil forces that provide superolateral nostril support. EI, flexural rigidity.

Fig. 3.

Surgical illustration demonstrating the lateral incision, pocket creation, graft placement, and improvement in nostril contour.